Door Cylinders
3 Star Euro Thumbturn Cylinders
All our 3 star cylinders are a premium quality product that features effective protection against bumping, picking and drilling, as well as the snap and extract method. This is all achieved without the need to fit any supplementary security devices.
The external side features a sacrificial break point to hamper attempts to gain entry by snapping and extracting the cylinder. Once this has broken away, the interlocking mechanism engages to prevent further damage to the cylinder
The external end is clearly marked with the Kitemark and 3 TS007 stars to deter any would be burglar and is available in bright nickel and brass finishes,
Each cylinder is supplied with 5 dimple keys, while keyed alike pairs are supplied with 6 keys.
Each cylinder has a 10 years mechanical warranty. The cylinder must be registered online at for the warranty to be valid.
When the cylinder is registered, it is also automatically protected by the anti-snap guarantee. Additional keys can only be purchased if the customer’s unique personal password is given. The password is set up when the cylinder is registered for its performance guarantee. This is an extra layer of security for the home owner.
Our supplier guarantees that if a successful break in is achieved as a result of the cylinder being snapped and then extracted they will pay the home owner £2000 in compensation.
Benefits at a glance:
• TS007 Kitemark 3 star profile cylinder (KM591531)
• Protects against bumping, drilling, picking and snap & extract
• Supplied with 5 attractive dimple keys
• Security AND safety assured
• keyed alike available
• 10 year performance warranty
• Guarantee pays out £2000 if a break in is achieved as a direct result of the cylinder snapping
• Key Security Scheme provides protection against keys being fraudulently obtained.
To order the correct cylinder please measure your cylinder from the end of the cylinder that will have the thumb turn on first, measure from the start of the cylinder to the centre of the screw hole, this will give you measurement A then measure from the centre of the screw hole to the end of the cylinder where the key goes and this will give you measurement B, e.g. 40/50